关于塑料，化工方面的
追加400分
Product notes
Values are for injection molded plaques,side gated.
Key features
- dielectric constant 2.3,dielectric strength at 3.17 mm(125mil).196kv/mm(500v/mil)
- flame resistant HB material
- continuous temperature rating 1000 hrs.
- Excellent flex fatigue resistance
- Excellent UV resistance
Extrudes thin sections with excellent definition (down to 0.33【1.3``】radius).long runs with minimal build up of material on screen packs or narrow die sections.
Aging preperties
Properties after oven air aging 168 hrs.
- tensile strength.change:+10%
- elongation,change:-15%
- hardness change；NA
properties after oven air aging 168hrs.
- tensilestrength,change；NA
- elongation,change:NA
- hardness chang:NA
Processing statement
Santoprene thermoplastic rubber is a shear-dependent material that can be processed on conventional thermoplastic equipment for injection molding,extrusion or blow molding.santoprene rubber has a wide temperature processing window from 177 to 232(350 to 450).desiccant drying for 3hours at 82(180 f)is recommended.for extrusin,.a general purpose screw with a compressin ratio of 2.5to 3.0 is recommended.materials can be recycled.
Santoprene tubber is incompatible with acetal and PVC.please consult our material safety data sheet and rheology/processing brochure.
Revision date
-11/98-
不要拿在线翻译的给我看，浪费时间和空间
Values are for injection molded plaques,side gated.
Key features
- dielectric constant 2.3,dielectric strength at 3.17 mm(125mil).196kv/mm(500v/mil)
- flame resistant HB material
- continuous temperature rating 1000 hrs.
- Excellent flex fatigue resistance
- Excellent UV resistance
The excellent definition of the sections with of the Extrudes thin.(0.33 【 of down to 1.3``】radius)long runs with minimal build up of material on screen packs or narrow die sections.
Aging preperties
Properties after oven air aging 168 hrs.
- tensile strength.change:+10%
- elongation,change:-15%
- Hardness change;NA
properties after oven air aging 168hrs.
- Tensilestrength, change;NA
- elongation,change:NA
- hardness chang:NA
Processing statement
Santoprene thermoplastic rubber is a shear-dependent material that can be processed on conventional thermoplastic equipment for injection molding,extrusion or blow molding.santoprene rubber has a wide temperature processing window from 177 to 232(350 to 450).desiccant drying for 3hours at 82(180 f)is recommended.for extrusin,.a general purpose screw with a compressin ratio of 2.5to 3.0 is recommended.materials can be recycled.
Santoprene tubber is incompatible with acetal and PVC.please consult our material safety data sheet and rheology/processing brochure.
Revision date
-11/98-
价值是给注入形成匾,边禁足。
