windows7 delphi 获取硬盘序列号.物理序列号
delphi7 的.
第1个回答 推荐于2016-07-15
unit Unit1;
interface
uses
Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
Dialogs, StdCtrls;
type
TForm1 = class(TForm)
Edit1: TEdit;
Button1: TButton;
procedure Button1Click(Sender: TObject);
procedure Button2Click(Sender: TObject);
private
{ Private declarations }
public
{ Public declarations }
end;
var
Form1: TForm1;
implementation
{$R *.dfm}
procedure TForm1.Button1Click(Sender: TObject);
begin
end;
//获得硬盘序列号
function GetIdeSerialNumber: pchar;
const IDENTIFY_BUFFER_SIZE = 512;
type
TIDERegs = packed record
bFeaturesReg: BYTE; // Used for specifying SMART "commands".
bSectorCountReg: BYTE; // IDE sector count register
bSectorNumberReg: BYTE; // IDE sector number register
bCylLowReg: BYTE; // IDE low order cylinder value
bCylHighReg: BYTE; // IDE high order cylinder value
bDriveHeadReg: BYTE; // IDE drive/head register
bCommandReg: BYTE; // Actual IDE command.
bReserved: BYTE; // reserved for future use. Must be zero.
end;
TSendCmdInParams = packed record
// Buffer size in bytes
cBufferSize: DWORD;
// Structure with drive register values.
irDriveRegs: TIDERegs;
// Physical drive number to send command to (0,1,2,3).
bDriveNumber: BYTE;
bReserved: array[0..2] of Byte;
dwReserved: array[0..3] of DWORD;
bBuffer: array[0..0] of Byte; // Input buffer.
end;
TIdSector = packed record
wGenConfig: Word;
wNumCyls: Word;
wReserved: Word;
wNumHeads: Word;
wBytesPerTrack: Word;
wBytesPerSector: Word;
wSectorsPerTrack: Word;
wVendorUnique: array[0..2] of Word;
sSerialNumber: array[0..19] of CHAR;
wBufferType: Word;
wBufferSize: Word;
wECCSize: Word;
sFirmwareRev: array[0..7] of Char;
sModelNumber: array[0..39] of Char;
wMoreVendorUnique: Word;
wDoubleWordIO: Word;
wCapabilities: Word;
wReserved1: Word;
wPIOTiming: Word;
wDMATiming: Word;
wBS: Word;
wNumCurrentCyls: Word;
wNumCurrentHeads: Word;
wNumCurrentSectorsPerTrack: Word;
ulCurrentSectorCapacity: DWORD;
wMultSectorStuff: Word;
ulTotalAddressableSectors: DWORD;
wSingleWordDMA: Word;
wMultiWordDMA: Word;
bReserved: array[0..127] of BYTE;
end;
PIdSector = ^TIdSector;
TDriverStatus = packed record
// 驱动器返回的错误代码,无错则返回0
bDriverError: Byte;
// IDE出错寄存器的内容,只有当bDriverError 为 SMART_IDE_ERROR 时有效
bIDEStatus: Byte;
bReserved: array[0..1] of Byte;
dwReserved: array[0..1] of DWORD;
end;
TSendCmdOutParams = packed record
// bBuffer的大小
cBufferSize: DWORD;
// 驱动器状态
DriverStatus: TDriverStatus;
// 用于保存从驱动器读出的数据的缓冲区,实际长度由cBufferSize决定
bBuffer: array[0..0] of BYTE;
end;
var
hDevice: Thandle;
cbBytesReturned: DWORD;
SCIP: TSendCmdInParams;
aIdOutCmd: array[0..(SizeOf(TSendCmdOutParams) + IDENTIFY_BUFFER_SIZE - 1) - 1] of Byte;
IdOutCmd: TSendCmdOutParams absolute aIdOutCmd;
procedure ChangeByteOrder(var Data; Size: Integer);
var
ptr: Pchar;
i: Integer;
c: Char;
begin
ptr := @Data;
for I := 0 to (Size shr 1) - 1 do begin
c := ptr^;
ptr^ := (ptr + 1)^;
(ptr + 1)^ := c;
Inc(ptr, 2);
end;
end;
begin
Result := ''; // 如果出错则返回空串
if SysUtils.Win32Platform = VER_PLATFORM_WIN32_NT then begin // Windows NT, Windows 2000
// 提示! 改变名称可适用于其它驱动器,如第二个驱动器: '\\.\PhysicalDrive1\'
hDevice := CreateFile('\\.\PhysicalDrive0', GENERIC_READ or GENERIC_WRITE,
FILE_SHARE_READ or FILE_SHARE_WRITE, nil, OPEN_EXISTING, 0, 0);
end else // Version Windows 95 OSR2, Windows 98
hDevice := CreateFile('\\.\SMARTVSD', 0, 0, nil, CREATE_NEW, 0, 0);
if hDevice = INVALID_HANDLE_VALUE then Exit;
try
FillChar(SCIP, SizeOf(TSendCmdInParams) - 1, #0);
FillChar(aIdOutCmd, SizeOf(aIdOutCmd), #0);
cbBytesReturned := 0;
// Set up data structures for IDENTIFY command.
with SCIP do begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
// bDriveNumber := 0;
with irDriveRegs do begin
bSectorCountReg := 1;
bSectorNumberReg := 1;
// if Win32Platform=VER_PLATFORM_WIN32_NT then bDriveHeadReg := $A0
// else bDriveHeadReg := $A0 or ((bDriveNum and 1) shl 4);
bDriveHeadReg := $A0;
bCommandReg := $EC;
end;
end;
if not DeviceIoControl(hDevice, $0007C088, @SCIP, SizeOf(TSendCmdInParams) - 1,
@aIdOutCmd, SizeOf(aIdOutCmd), cbBytesReturned, nil) then Exit;
finally
CloseHandle(hDevice);
end;
with PIdSector(@IdOutCmd.bBuffer)^ do begin
ChangeByteOrder(sSerialNumber, SizeOf(sSerialNumber));
(Pchar(@sSerialNumber) + SizeOf(sSerialNumber))^ := #0;
Result := Pchar(@sSerialNumber);
end;
end;
procedure TForm1.Button2Click(Sender: TObject);
begin
Edit1.Text := strpas(GetIdeSerialNumber);
end;
end.
{新建工程,把代码粘进去,添加一个edit和一个
button命名和里面一样就行。在xp环境调试过,你试试吧}本回答被提问者采纳
interface
uses
Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
Dialogs, StdCtrls;
type
TForm1 = class(TForm)
Edit1: TEdit;
Button1: TButton;
procedure Button1Click(Sender: TObject);
procedure Button2Click(Sender: TObject);
private
{ Private declarations }
public
{ Public declarations }
end;
var
Form1: TForm1;
implementation
{$R *.dfm}
procedure TForm1.Button1Click(Sender: TObject);
begin
end;
//获得硬盘序列号
function GetIdeSerialNumber: pchar;
const IDENTIFY_BUFFER_SIZE = 512;
type
TIDERegs = packed record
bFeaturesReg: BYTE; // Used for specifying SMART "commands".
bSectorCountReg: BYTE; // IDE sector count register
bSectorNumberReg: BYTE; // IDE sector number register
bCylLowReg: BYTE; // IDE low order cylinder value
bCylHighReg: BYTE; // IDE high order cylinder value
bDriveHeadReg: BYTE; // IDE drive/head register
bCommandReg: BYTE; // Actual IDE command.
bReserved: BYTE; // reserved for future use. Must be zero.
end;
TSendCmdInParams = packed record
// Buffer size in bytes
cBufferSize: DWORD;
// Structure with drive register values.
irDriveRegs: TIDERegs;
// Physical drive number to send command to (0,1,2,3).
bDriveNumber: BYTE;
bReserved: array[0..2] of Byte;
dwReserved: array[0..3] of DWORD;
bBuffer: array[0..0] of Byte; // Input buffer.
end;
TIdSector = packed record
wGenConfig: Word;
wNumCyls: Word;
wReserved: Word;
wNumHeads: Word;
wBytesPerTrack: Word;
wBytesPerSector: Word;
wSectorsPerTrack: Word;
wVendorUnique: array[0..2] of Word;
sSerialNumber: array[0..19] of CHAR;
wBufferType: Word;
wBufferSize: Word;
wECCSize: Word;
sFirmwareRev: array[0..7] of Char;
sModelNumber: array[0..39] of Char;
wMoreVendorUnique: Word;
wDoubleWordIO: Word;
wCapabilities: Word;
wReserved1: Word;
wPIOTiming: Word;
wDMATiming: Word;
wBS: Word;
wNumCurrentCyls: Word;
wNumCurrentHeads: Word;
wNumCurrentSectorsPerTrack: Word;
ulCurrentSectorCapacity: DWORD;
wMultSectorStuff: Word;
ulTotalAddressableSectors: DWORD;
wSingleWordDMA: Word;
wMultiWordDMA: Word;
bReserved: array[0..127] of BYTE;
end;
PIdSector = ^TIdSector;
TDriverStatus = packed record
// 驱动器返回的错误代码,无错则返回0
bDriverError: Byte;
// IDE出错寄存器的内容,只有当bDriverError 为 SMART_IDE_ERROR 时有效
bIDEStatus: Byte;
bReserved: array[0..1] of Byte;
dwReserved: array[0..1] of DWORD;
end;
TSendCmdOutParams = packed record
// bBuffer的大小
cBufferSize: DWORD;
// 驱动器状态
DriverStatus: TDriverStatus;
// 用于保存从驱动器读出的数据的缓冲区,实际长度由cBufferSize决定
bBuffer: array[0..0] of BYTE;
end;
var
hDevice: Thandle;
cbBytesReturned: DWORD;
SCIP: TSendCmdInParams;
aIdOutCmd: array[0..(SizeOf(TSendCmdOutParams) + IDENTIFY_BUFFER_SIZE - 1) - 1] of Byte;
IdOutCmd: TSendCmdOutParams absolute aIdOutCmd;
procedure ChangeByteOrder(var Data; Size: Integer);
var
ptr: Pchar;
i: Integer;
c: Char;
begin
ptr := @Data;
for I := 0 to (Size shr 1) - 1 do begin
c := ptr^;
ptr^ := (ptr + 1)^;
(ptr + 1)^ := c;
Inc(ptr, 2);
end;
end;
begin
Result := ''; // 如果出错则返回空串
if SysUtils.Win32Platform = VER_PLATFORM_WIN32_NT then begin // Windows NT, Windows 2000
// 提示! 改变名称可适用于其它驱动器,如第二个驱动器: '\\.\PhysicalDrive1\'
hDevice := CreateFile('\\.\PhysicalDrive0', GENERIC_READ or GENERIC_WRITE,
FILE_SHARE_READ or FILE_SHARE_WRITE, nil, OPEN_EXISTING, 0, 0);
end else // Version Windows 95 OSR2, Windows 98
hDevice := CreateFile('\\.\SMARTVSD', 0, 0, nil, CREATE_NEW, 0, 0);
if hDevice = INVALID_HANDLE_VALUE then Exit;
try
FillChar(SCIP, SizeOf(TSendCmdInParams) - 1, #0);
FillChar(aIdOutCmd, SizeOf(aIdOutCmd), #0);
cbBytesReturned := 0;
// Set up data structures for IDENTIFY command.
with SCIP do begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
// bDriveNumber := 0;
with irDriveRegs do begin
bSectorCountReg := 1;
bSectorNumberReg := 1;
// if Win32Platform=VER_PLATFORM_WIN32_NT then bDriveHeadReg := $A0
// else bDriveHeadReg := $A0 or ((bDriveNum and 1) shl 4);
bDriveHeadReg := $A0;
bCommandReg := $EC;
end;
end;
if not DeviceIoControl(hDevice, $0007C088, @SCIP, SizeOf(TSendCmdInParams) - 1,
@aIdOutCmd, SizeOf(aIdOutCmd), cbBytesReturned, nil) then Exit;
finally
CloseHandle(hDevice);
end;
with PIdSector(@IdOutCmd.bBuffer)^ do begin
ChangeByteOrder(sSerialNumber, SizeOf(sSerialNumber));
(Pchar(@sSerialNumber) + SizeOf(sSerialNumber))^ := #0;
Result := Pchar(@sSerialNumber);
end;
end;
procedure TForm1.Button2Click(Sender: TObject);
begin
Edit1.Text := strpas(GetIdeSerialNumber);
end;
end.
{新建工程,把代码粘进去,添加一个edit和一个
button命名和里面一样就行。在xp环境调试过,你试试吧}本回答被提问者采纳